Sena PS410 User Manual

Sena Device Server and Serial/IP Application Guide Version 1.0.0 2005. 3. 7.

2.1.4 Operation - After opening a Virtual COM Port in the user application, Serial/IP will start communication with Sena Device Server. - User can m

Note: When using the Serial/IP in client mode, user application needs to know the IP of the Sena Device Server. In this scenario, if the users networ

2.2. VirtualCOM Operation Mode Virtual COM Mode of Sena device servers use a driver to create a "Virtual COM Port" so that the software thin

2.2.3 Serial/IP Configuration - Connection protocol is set to Telnet. 2.2.4 Sample Application Here is a sample application named "Protek"

.

3. Serial/IP Server Operation Mode 3.1 RawTCP Operation Mode 3.1.1 Supported Products LS, NEMO, PS, SS, STS 3.1.2 Sena Device Server configuration

- Connection Protocol: Connection has been set to RawTCP mode. 3.1.4 Operation - If Virtual COM port is opened, then Serial/IP waits at the listenin

4. SSL Security features Sena now takes COM Port Redirection a step further with encryption features, offering a secure Ethernet connection between th

4.1.3 SSL Security configuration options in Serial/IP - Specify the operation mode according to users’ application scenario. - Check the “Use SSL/T

Note: Serial/IP settings according to the Encryption methods of Sena Device Servers. Sena Device Server Serial/IP Remarks SSLv3 Rollback to v2 SSL

Revision History Revision Date Name Description V1.0.0 2005-04-21 Kumar Serial/IP 4.3.2 Guide T

4.2 SSL Data Transfer using certificate 4.2.1 Supported Models HelloDevice PS110/PS410/PS810, SS100/SS110/SS400/SS800, and STS800/STS1600 4.2.2 Sena D

4.2.3 Configuring the Encryption feature To use SSL encryption: 1. Click the [Advanced] button to get the Advanced Settings dialog window. 2. Sel

- In the Certificate Authority Keys group, select the radio button that corresponds to the source of the CA keys to be used. Built-in CA keys are t

- Select the checkbox Supply Certificate. This enables the other controls in the window. - In the Certificate File field, enter the filename of

- The password for this certificate is "password".

4.2.4 Operation - Open the Virtual COM Port COM4 and wait for the incoming connection. - If the application sends data through COM1 port connected t

5. Appendix - Host mode configuration between the Serial/IP and Sena Device server in communication depends on the TCP data initiation. - Depending

Table of Contents 1. Serial/IP...

4.2.3 Configuring the Encryption feature...21 4.2.4 Operation ...

1. Serial/IP 1.1 Overview Sena bundles Serial/IP™ from Tactical Software as standard COM Port Redirector software of Sena products. This software en

1.3 Screenshot - Configuration of COM x: Enter the IP address and Local Port number of Sena Device Server when working in Client mode. - Accept Co

Note: For more information on Serial/IP installation, please refer the Serial/IP user manual. 1.4 Operation Modes 1.4.1 Client Mode Check the “Connec

2.1.3 Configuration in the Serial/IP Example - Connect to server: IP address and Port number of the connected Sena Device Server is 192.168.18.50:

- DSR/DCD/CTS Emulation: These settings allow control of the respective signals as presented to the application by the redirector. - Restore Failed