Sena SPH10H User's Guide download pdf (Page 14)

English

SPH10H

2. Within 2 seconds, tap the Jog Dial again, then the

LED turns to red flashing and the beeps turn to

double mid-tone beeps. You will hear a voice prompt

saying “Media selective pairing”.

3. Search for Bluetooth devices on your smartphone.

Select the Sena SPH10H in the list of devices

detected on your phone.

4. Enter 0000 for the PIN. Some smartphones may not

ask for PIN.

7.2 HFP for Phone Call Only

1. Turn on the headset and press the Phone Button for 5

seconds until the LED flashes red and blue alternately

and you hear multiple beeps.

2. Within 2 seconds, tap the Phone Button again, then

the LED turns to blue flashing and the beeps turn to

multiple mid-tone beeps. You will hear a voice prompt

saying “Phone selective pairing”.

3. Search for Bluetooth devices on your smartphone.

Select the Sena SPH10H in the list of devices

detected on your phone.

4. Enter 0000 for the PIN. Some smart phones may not

ask for PIN.

8.1 Pairing with Other SPH10H Headsets for

Intercom Conversation

The SPH10H can be paired with up to three other

headsets for Bluetooth intercom conversation.

1. Turn on the two SPH10H headsets (A and B) that you

would like to pair with each other.

2. Press and hold the Jog Dial of the headset A and B

for 5 seconds until red LEDs of the both units start

to flash rapidly. You will hear a voice prompt saying

“Intercom pairing”.

3. Simply tap the Jog Dial of any one of the two headsets

A or B (It doesn’t matter that you choose A or B.) and

wait until the LEDs of both headsets turn to blue and

intercom connection is automatically established. The

two SPH10H headsets A and B are paired with each

other for intercom conversation. If the pairing process

is not completed within one minute, the SPH10H will

return to stand-by mode.

8. INTERCOM PAIRING

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 41 42

No comments

Sena SPH10H User's Guide Page 14