Sena Parani-SD200L User Manual

1Parani-SD200LUser GuideVersion 1.0.02007-07-02

102. Getting StartedThis chapter describes how to set up the Parani-SD200L for the first time.- 2.1 Panel Layout explains the panel layout.- 2.2 Conne

11USB power cable or DC power cable that is included in the package. If power is properly supplied, the[Power] lamp will display a blink green color.F

123. Configuration3.1. Operation ModesIn addition to the serial port configurations, the Parani-SD200L requires also includes some settingsfor Bluetoo

13Table 3-2 The Parani-SD200L LED IndicatorsIndicator Power LED Standby LED Connect LEDMode0Green (every 0.5 sec) ┏┓ Red (every 0.5 sec) ┏┓OffMode1Gre

14the next data when the buffer becomes full. This can mean a loss of data may occur. As thetransmission data becomes large, the possibility of data l

15SD2, respectively.Step 1. Turn off all the nearby Parani-SD’sStep 2. Turn on SD1 and SD2 and hardware reset both of them by pressing Reset Button.St

16Figure 3-2 Serial Port SettingSet each option properly and click [Confirm]. If the settings of the Parani-SD200L are different from theParaniWin, an

17Figure 3-4 Information WindowSerial port settings can be changed by <Start Configuration> and <ParaniWIN Configuration> ofParaniWIN in t

18Figure 3-6 Device Setting WindowParani-SD200L supports two security options, Authentication and Encryption. If you enable theAuthentication option,

19Figure 3-7 Connection(out) WindowClick [Search] button to search nearby Bluetooth devices. Once several Bluetooth devices has beenfound, select one

2User Guide for the Parani-SD200LVersion 1.0.0Firmware version 1.0.XLast revised on July 02, 2007Printed in KoreaCopyrightCopyright 2007, Sena Technol

20Figure 3-8 Signal Strength TestThe signal strength test shows LInkQuality and RSSI values. The closer LinkQuality is to 255 andRSSI is to 0, this me

21Figure 3-9 Connection(in) WindowIf the Connection Wizard icon is clicked, an easy to use pairing menu will appear:Figure 3-10 Connection Wizard Wind

22In this example we will refer to the two Parani-SDs as SD1 and SD2 respectively. To use this menu,please do the following:Step 1. Connect the first

23Figure 3-12 HyperTreminalAttach Parani-SD200L to serial port of host computer and power on the Parani-SD200L. CheckConnect LED and Standby LEDTheir

244. Approval Information4.1. FCC4.1.1. FCC Compliance StatementThis device complies with part 15 of the FCC Rules. Operation is subject to the follow

255. RF Information5.1. Radio Frequency Range2.402~2.480GHz5.2. Number of Frequency Channel79 channels5.3. Transmission MethodFHSS(Frequency Hopping S

26Appendix A: ConnectionsA.1. Serial Port Pin OutsParani-SD200Lis a DCE device compatible with the RS232 standard, a DB9 female interface.Figure A-1 P

27A.2.1. To Host with DTE InterfaceDTE(Host System) DCE (Parani-SD)1. DCD2. RXD3. TXD4. DTR5. GND6. DSR7. RTS8. CTS9.1. DCD2. TXD3. RXD4. DSR5. GND6.

28Appendix B: AT CommandsB.1. TerminologyB.1.1. AT CommandAT command set is the HT in fact standardT H HT languageTH for controlling HTmodemsTH . The

29B.1.6. SymbolsThe symbols are used for the description of command syntax as follows:Symbols Meaning ASCII Code Carriage return 0x0D Line feed 0x0A

3Revision HistoryRevision Date Name DescriptionV1.0.0 2007-06-25 Yh Moon First Release

30B.3. Command DescriptionB.3.1. ATZSD Response OKPurpose Software ResetDescription This has the same effects as Powercyclingthe unit.This command

31B.3.5. AT+USEDIP?SD Response mPurpose Check the Baud rate set by the dip switchDescription m=0: Dip switches are set to ‘S/W Config’m=1: Please v

32B.3.9. AT+BTVER?SD Response SD100v1.0.0OKPurpose Display devicefirmware versionDescription Display device firmware versionReference AT+BTINFO?B

33The parameter nn must bea printable character.Reference +++, ATOExample AT+SETESC,42B.3.13. ATOSD Response NonePurpose Convert the operation status

34to= Time duration in secondsDescription For the given to, Parani-SD200L is waiting for the inquiry and connection from otherBluetooth devices. If th

35Parameters 112233445566 = BD addressDescription Parani-SD200L attempts to connect to the Bluetooth device with the given BD address. Tomake successf

36Description This clears the list of Bluetooth devices linked with the same key in flash memory. To takeeffect the ATZ command must be used or Powerc

37Parameters n=0: Inactivate (Default)n=1:ActivateDescription During no data transmission, Parani-SD200L can be in low power mode to save the power.It

38Parameters nn= Address of S-registermm= New value of S-registerDescription Some S-registers are optimized for the overall performance and protected

39AT+USEDIP?○ ○AT+BTVER?○ ○AT+BTRSSI,n●◎ Valid only when Parani-SD200L is not connected to other Bluetooth device.● Valid only when Parani-SD200L is c

4Contents1. Introduction 71.1. Overview...

40Appendix C: S-RegisterS-registers contains 46 parameters for the Parani-SD200L. These are stored in flash memory and thevalues will be saved unless

41C.7. S12: Clear Data Buffer When Disconnected (default 0)S12=0, Parani-SD200L does not clear the data buffer when disconnected.S12=1, Parani-SD200L

42C.17. S46: BD Address of Last Connected DeviceThis saves the BD address of the Bluetooth device connected most recently.

43Appendix D: Trouble ShootingD.1. No Data TransmissionD.1.1. COM Port SettingsCheck whether the Baud rate of Parani-SD200Lmatches that of its host eq

44Appendix E: SD200L mechanical drawingE.1. SD200L mechanical drawing95.3 with stub antenna16.270.0 without antenna14.30.820.5

45Appendix F: WarrantyF.1. GENERAL WARRANTY POLICYSena Technologies, Inc. (hereinafter referred to as SENA) warrants that the Product shall conform to

46- Water spills,- Replacement of parts due to normal wear and tear,- Hardware has been altered in any way,- Product that has been exposed to repair a

5B.3.1. ATZ... 30B.3.2. AT&

6D.2.2. Response Message ... 43D.3. Transmission Delay.

71. Introduction1.1. OverviewParani-SD200L is a terminal device for wireless serial communication using Bluetooth technology thatis an international s

81.3. Product SpecificationSD200LSerial Interface Onefemale DB9 serial port for data communicationSerial speeds 1200bps to 230400bpsFlow Control: None

9Note *:Bluetooth v1.2 supports improved AFH function. AFH function is to mitigate theinterference between WiFi and Bluetooth radios by automatically