Sena 205 User Manual download pdf (Page 16)

Promi-SD 205-OA User Manual – 2. Configurations 14

LED Indicators

Indicator Power LED Standby LED Connect LED

Mode0 Green ┏━━━━━━━ Red ┏━━━━━━━

Mode1

Green ┏━━━━━━━ Green (every 1 sec) ┏┓

Mode2 Green ┏━━━━━━━ Green (every 3 sec) ┏┰┓

Mode3 Green ┏━━━━━━━ Green (every 3 sec) ┏┰┓

Connected Green ┏━━━━━━━ Green ┏━━━━━━━

RS232-Tx and RS232-Rx LED are blinking accordingly when data is transmitted. For small data transmission, it may be

hard to recognize the quick blinking.

Serial Ports

The applicable settings for serial ports are as follows.

Serial Port Settings Values

Baud rate 1200, 2400, 4800, 9600 , 19200, 38400, 57600, 115200, 230400

Data bit

Parity

No parity , Even parity, Odd parity

Stop bit 1 , 2

Hardware Flow Control No use

The values in box are the factory defaults.

 Data Bit

Promi-SD supports only 8 data bit. In the case of 7 data bit, please contact the technical support.

Reset to Factory Defaults

To turn back all the configurations to its factory settings, press the reset button depicted in Fig. 1-3. Press the reset

button with a narrow pointed tool like paper clip longer than 1 second. Reset works only when power is on.

Dip Switch (Promi-SD205 OA)

This feature is only on Promi-SD205 OA. With the combination of 4 slot dip switches, baud rate can be set simply without

host computer.

Pairing Button

Dip Switch

Reset Button

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 57 58

No comments

Sena 205 User Manual Page 16