Sena PS410 Specifications download pdf (Page 9)

5.4 Terminal Server Configuration Via Serial Console

To configure the terminal server via the serial console port, open a terminal emulator,

set the baud rate to 9600, and connect to the console port with a null modem cable.

Once connected, logging in at the prompt will bring up a BusyBox shell. Entering the

command ‘editconf’ will start a text-based configuration menu.

5.5 Settings Required for Proper Terminal Server Operation

If a factory reset is performed on the terminal server, several settings will need to be

manually reconfigured.

/serial/*1/Port title = Radio A

/serial/*2/Port title = Radio B

/serial/*1/hostmode/Port number = 5001

/serial/*2/hostmode/Port number = 5002

/serial/*1/hostmode/Telnet Support = Enable

/serial/*2/hostmode/Telnet Support = Enable

/serial/*1/hostmode/DTR option = High when TCP/UDP is opened

/serial/*2/hostmode/DTR option = High when TCP/UDP is opened

1 2 3 4 5 6 7 8 9 10 11 12 13

No comments

Sena PS410 Specifications Page 9