Sena SPH10S User's Guide download pdf (Page 16)

English

SPH10

You can set the configuration of the SPH10 by the

voice menu instruction as below.

1. To enter into voice configuration menu, press and

hold the Jog Dial for 12 seconds until the LED

shows solid blue and you hear high tone double

beeps. You will also hear a voice prompt saying

“Conguration menu”.

2. Rotate the Jog Dial clockwise or counter-clockwise

to navigate between the menus. You will hear voice

prompts for each menu items as below.

3. You can enable the feature or execute the

command by tapping the Phone Button, or disable

the feature by tapping the Jog Dial.

4. If any button is not pressed within 10 seconds, the

SPH10 will exit the configuration and goes back

to stand-by.

5. If you want to exit the configuration immediately,

rotate the Jog Dial until you hear a voice prompt,

“Exit conguration”, and tap the Phone Button.

9. SPH10 CONFIGURATION SETTING

The voice prompt for each menu item is as below:

(1) VOX phone (4) PLC setting

(2) VOX intercom (5) Delete all pairings

(3) Voice prompt (6) Exit conguration

9.1 Enabling/Disabling Voice Activated

Phone Answering

If this feature is enabled, you can answer incoming

calls by simply saying a word loudly enough. For

example, when you hear a series

VOX phone

PLC setting

Exit configuration VOX intercom

Delete all pairings Voice prompt

Voice Prompt

“VOX phone”

Factory Default Enable

Enable Tap the Phone Button

Disable Tap the Jog Dial

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 40 41

No comments

Sena SPH10S User's Guide Page 16