Sena SMH3 User's Guide download pdf (Page 17)

SMH3

English

intercom call. You will also hear a voice prompt saying “Intercom

requested”. In this case, the intercom call does not override the

mobile phone call because intercom has lower priority than mobile

call. You have to hang up the mobile phone call to make or receive an

intercom call.

Intercom Failure

When you try to start an intercom conversation with an intercom friend

who is already having a mobile phone call with another person, you will

hear a low tone double beep signifying a busy signal. You will also hear a

voice prompt saying “Intercom failed, try again later”. In this case, you

have to try again later. On the other hand, the intercom friend will hear

4 high tone beeps alerting them that there is an incoming intercom call.

Intercom Reconnection

If your intercom friend goes out of range while having an intercom

conversation, you may hear static noise and eventually the intercom will

be disconnected. In this case, the SMH3 automatically tries to reconnect

the intercom every 8 seconds. You will hear high tone double beeps until

the intercom is reestablished. If you don’t want to make a reconnection,

press and hold the (-) Button for 1 second to stop the attempt.

7. SMH3 CONFIGURATION SETTING

You can set the configuration of the SMH3 by the voice menu instruction

as below.

1. To enter into voice configuration menu, press and hold the (+) Button

for 10 seconds until the LED shows solid blue and you hear high tone

double beeps. You will hear a voice prompt saying “

menu”.

2. Press the (+) Button to navigate between menus. You will hear voice

prompts for each menu items as below.

3. You can enable or disable the feature or execute the command by

pressing the (-) Button.

4. If any button is not pressed within 10 seconds, the SMH3 will exit the

configuration and goes back to standby.

5. If you want to exit the configuration immediately, press and hold the

(+) Button until you hear a voice prompt, “”, and

press the (-) Button.

7. SMH3 CONFIGURATION SETTING

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 26 27

No comments

Sena SMH3 User's Guide Page 17