Sena SPH10 Specifications download pdf (Page 9)

English

SPH10

• A2DP Stereo Music Only

1. Turn on the headset and press the Phone Button for 5 seconds

until the LED flashes red and blue alternately and you hear multiple

beeps.

2. Within 2 seconds, tap the Jog Dial again, then the LED turns

to red flashing and the beeps turn to double mid-tone beeps.

3. Search for Bluetooth devices on your smartphone. The headset

will be listed on your mobile phone as SPH10.

4. Enter 0000 for the PIN. Some smartphones may not ask for PIN.

• HFP for Phone Call Only

1. Turn on the headset and press the Phone Button for 5 seconds

until the LED flashes red and blue alternately and you hear multiple

beeps.

2. Within 2 seconds, tap the Phone Button again, then the LED

turns to blue flashing and the beeps turn to multiple mid-tone

beeps.

3. Search for Bluetooth devices on your smartphone. The headset

will be listed on your mobile phone as SPH10.

4. Enter 0000 for the PIN. Some smartphones may not ask for PIN.

The SPH10 can be paired with up to three other headsets for

Bluetooth Intercom conversation.

1. Turn on the two headsets (A and B) that you would like to

pair with each other.

2. Press and hold the Jog Dial of the headset A for 5 seconds

until red LED starts to flash rapidly.

3. Press and hold the Jog Dial of the headset B for 5 seconds

until red LED starts to flash rapidly.

4. Simply tap the Jog Dial of any one of the two headset A or

B (It doesn’t matter that you choose A or B) and wait until the

LEDs of both headsets turn to blue and intercom connection is

automatically established. (Headset A is paired with Headset

PAIRING WITH OTHER SPH10 HEADSETS

FOR INTERCOM CONVERSATION

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 28 29

No comments

Sena SPH10 Specifications Page 9