Sena SMH5D-FM-UNIV User's Guide download pdf (Page 19)

English

SMH5-FM

10.2 Enabling/Disabling RDS AF

RDS AF allows a receiver to re-tune to a different frequency providing

the same station has an additional frequency. In RDS AF, the receiver

will “re-tune” to the second frequency location when the rst signal

becomes too weak. With RDS AF enabled on the receiver, a radio

station with more than one frequency can be used. Tap the Phone

Button to enable the RDS AF.

Voice Prompt

“RDS AF setting”

Factory Default Disable

Enable Tap the Phone Button

Disable Tap the Jog Dial

Note:

RDS feature may be available when radio channel station provides

equivalent service.

2. Tap the Phone Button, and you will hear a voice prompt saying

“Speed dial one” and “Phone connected”.

3. Rotate the Jog Dial to select one of three speed dial numbers and

you hear a voice prompt saying “Speed dial (#)”.

4. Call a phone number you want to assign and you will hear a voice

prompt saying “Save speed dial (#)”. The phone number is

automatically assigned to the selected speed dial number. Then

the phone call will hang up before being connected.

5. To exit the menu, rotate the Jog Dial clockwise or counter

clockwise until you hear a voice prompt saying “Cancel”, and

tap the Phone Button to conrm. You will then hear a voice prompt

saying “Cancel”. If any button is not pressed within 1 minute, the

SMH5-FM will exit the conguration menu and go back to stand-

by mode.

Note:

1. After assigning a phone number to one of three speed dials, you can

continually assign another phone number to the rest of two speed

dials.

2. You can assign phone numbers to speed dials in your PC. Please visit

the Sena Bluetooth web site at www.sena.com for more information.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 40 41

No comments

Sena SMH5D-FM-UNIV User's Guide Page 19