Sena SMH5D-FM-UNIV User's Guide download pdf (Page 26)

SMH5-FM

1. Rotate while pressing the Jog Dial clockwise to search up the

station dial or counter clockwise to search down the station dial.

2. If the tuner nds a station while searching frequencies, it stops the

seek function.

3. To save the current station, press and hold the Jog Dial for 2

seconds until you hear a voice prompt saying “Preset (#)?”.

4. Rotate the Jog Dial clockwise or counter clockwise, in order to

select which preset number you want for that specic station, up

to 10 preset stations. You may cancel the preset operation by

waiting approximately 10 seconds. You will then hear “Save preset

cancelled”. You can also rotate the Jog Dial clockwise or counter

clockwise until you hear “Cancel”. Tap the Jog Dial to conrm

cancellation. You will then hear “Save preset cancelled”.

5. To save the current station, tap the Jog Dial again. You will then

hear a voice prompt saying “Save preset (#)”.

6. To delete the saved station in the preset number, tap the Phone Button.

You will then hear a voice prompt saying “Delete preset (#)”.

Note:

You can save FM stations to presets before using FM radio. Connect SMH5-

FM to your PC and open the Sena Device Manager. It allows you to save FM

station frequencies up to 10 presets on the SMH5-FM setting menu.

11.8.4 Scan and Save

“Scan” is the function that searches from the current station frequency

upward for stations in a whole range of FM frequencies. To use the

scan function, please follow the procedures below:

1. Double tap the Phone Button. Then the current station frequency

moves upward to nd other station frequencies.

2. If the tuner nds a station, it stays at the station frequency for 8

seconds, then scanning to the next station frequency.

3. Scan function stops when you double tap the Phone Button again.

4. To save a station while scanning frequencies, tap the Phone Button

when at that station. You will hear a voice prompt from the SMH5-

FM saying “Save preset (#)”. The station will be saved as the next

preset number.

5. All stations preset during “Scan”, will overwrite previously set

stations.

6. To stop scan function, double tap the Phone Button.

11.8.5 Temporary Preset

With the temporary preset function, you may temporarily preset

stations automatically without changing the existing preset stations.

Tap the Phone Button three times which will automatically scan for

10 temporary preset stations. The temporary preset stations will be

cleared when the system is powered off.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 40 41

Comments to this Manuals

No comments

Sena SMH5D-FM-UNIV User's Guide Page 26

Comments to this Manuals

Related products and manuals for Motorcycle intercoms Sena SMH5D-FM-UNIV