Sena SPH10S User's Guide download pdf (Page 12)

English

SPH10

6.4 Pairing with the Sena SR10, Bluetooth

Two-way Radio Adapter

The Sena SR10 is a Bluetooth two-way radio adapter

for group communication, and uses HFP as do most

motorcycle specific GPS navigation systems. If you

pair the SPH10 with a SR10 by multipoint pairing, the

SPH10 is able to have two HFP devices at the same

time: mobile phone and Sena SR10.

1. Turn on the headset and press the Jog Dial for 5

seconds until the red LED is rapidly flashing and

you hear multiple beeps.

2. Within 2 seconds, tap the Phone Button again, then

the LED turns to blue flashing and the beeps turn

to high tone double beeps. You will hear a voice

prompt saying “Multipoint pairing”.

3. Turn on the SR10 and follow the SR10’s “Bluetooth

Headset Pairing” procedure to complete the

process. Please refer to the SR10 user's guide for

details.

4. When the pairing is completed, you will hear a

voice prompt saying “Your headset is paired”.

5. If the pairing process is not completed within three

minutes, the SPH10 will return to stand-by mode.

The incoming audio from the two-way radio via

SR10 is heard in the background while having an

intercom conversation or a mobile phone call. You

can listen to music, answer a mobile call, have an

intercom conversation and use a two-way radio via

SR10 for group communication as shown in the figure

below. A GPS navigation or a radar detector could

be connected to the SR10 by wire. The GPS voice

instruction or the radar detector alarm is also heard

in the background via SR10 while having an intercom

conversation or a phone call. Please refer to the SR10

user's guide for details.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 40 41

No comments

Sena SPH10S User's Guide Page 12