English
SPH10
17
9.4 Enabling/Disabling PLC (Packet Loss
Consealment)
The PLC (Packet Loss Concealment) algorithm
is enabled from the factory. It improves the audio
quality of the intercom and mobile phone handsfree
in the presence of data packet errors within the
Bluetooth link. It is recommend that this setting is
always enabled. However, if you feel that the audio
from the intercom or mobile phone is distorted in
certain circumstances, you may able to disable this
setting and check it.
9.5 Delete all Bluetooth Pairing Information
To delete all Bluetooth pairing information of the
SPH10, rotate the Jog Dial until you hear a voice
Voice Prompt
“PLC setting”
Factory Default Enable
Enable Tap the Phone Button
Disable Tap the Jog Dial
Voice Prompt
“Delete all pairings”
Factory Default N/A
Execute Tap the Phone Button
prompt, “Delete all pairings”, and tap the Phone
Button to confirm. Taping the Jog Dial is not available
for this setting.
9.6 Exit Voice Conguration Menu
To exit voice configuration menu and get back to
stand-by mode, rotate the Jog Dial until you hear
a voice prompt, “Exit conguration”, and tap the
Phone Button to confirm. Taping the Jog Dial is not
available for this setting.
Rotate Jog Dial Tap Phone Button Tap Jog Dial
VOX Phone Enable Disable
VOX Intercom Enable Disable
Voice Prompt Enable Disable
PLC Setting Enable Disable
Delete All Pairings Execute N/A
Exit Configuration Execute N/A
Voice Conguration Menu & Button Operations
Voice Prompt
“Exit conguration”
Factory Default N/A
Enable Tap the Phone Button
Comments to this Manuals