Sena SMH5D-FM-UNIV User's Guide download pdf (Page 11)

English

SMH5-FM

• The USB Power Cable is also used for rmware upgrade of the

SMH5-FM.

•

You can use any of the standard Micro-USB cables which is

mostly adopted by smartphones and general Bluetooth headsets

manufacturers.

•

The Charging LED beside the charging port turns on red while

charging, and turns to blue when the headset is fully charged. It

takes about 2.5 hours to be fully charged.

•

You can use the SMH5-FM while charging. It is especially helpful

when you use a cigarette charger for a long road trip.

•

A cigarette charger for the SMH5-FM is separately available as an

optional accessory but you can use any micro-USB car charger in

the market.

4.4 Low Battery Warning

When the battery is low, the blinking blue LED in stand-by mode

turns to red and you will hear mid-tone triple beeps and a voice

prompt saying “Low battery”.

*please contact Sena regarding locally approved agencies Sena accepts.

5. CHECKING THE BATTERY LEVEL

You can check the battery level in two different ways when the

headset is powering on.

5.1 LED Indicator

When the headset is powering on, the red LED ashes rapidly

indicating the battery level.

4 ashes = High, 70~100%

3 ashes = Medium, 30~70%

2 ashes = Low, 0~30%

5.2 Voice Prompt Indicator

When you power on the headset, keep pressing the Jog Dial and

Phone Button simultaneously for about 3 seconds until you hear

three high tone beeps. Then you will hear a voice prompt indicating

the battery level. However, if you release the buttons as soon as the

headset turns on, you will not hear the voice prompt for the battery

level.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 40 41

No comments

Sena SMH5D-FM-UNIV User's Guide Page 11