Sena SMH5D-FM-UNIV User's Guide download pdf (Page 18)

SMH5-FM

You can set the conguration of the SMH5-FM by the voice menu

instruction as below.

1. To enter into voice conguration menu, press and hold the Jog

Dial for 12 seconds until the LED shows solid blue and you hear

high tone double beeps. You will also hear a voice prompt saying

“Conguration menu”.

2. Rotate the Jog Dial clockwise or counter-clockwise to navigate

between the menus. You will hear voice prompts for each menu

items as below.

3. You can enable the feature or execute the command by tapping

the Phone Button, or disable the feature by tapping the Jog Dial.

4. If any button is not pressed within 10 seconds, the SMH5-FM will

exit the conguration and goes back to stand-by mode.

5. If you want to exit the conguration immediately, rotate the Jog Dial

until you hear a voice prompt saying “Exit conguration”, and tap

the Phone Button.

10. SMH5-FM CONFIGURATION SETTING

The voice prompt for each menu item is as below:

(1) Speed dial (5) Sidetone

(2) RDS AF setting (6) Noise control

(3) VOX phone

(7) Delete all pairings

(4) Voice prompt (8) Exit conguration

RDS AF setting

Exit configuration

VOX phone

Delete all pairings

Voice prompt

Speed dial

Sidetone

Noise control

10.1 Assigning Speed Dial

Voice Prompt

“Speed dial”

Factory Default N/A

Execute Tap the Phone Button

1. To assign a phone number as a speed dial, rotate the Jog Dial until

you hear a voice prompt saying “Speed dial”.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 40 41

No comments

Sena SMH5D-FM-UNIV User's Guide Page 18