Sena LS100W User Manual download pdf (Page 13)

Figure 2-3. Connecting a Serial Device to the LS100W

2.3 Accessing Console Port

There are two ways to access console port of the LS100W depending on whether the user is located

at a local site or at a remote site.

- Serial console:

Local users can connect directly to the serial console port of the LS100W using serial

console/data cable (null-modem cable). The serial port of the LS100W is used as the console port

as well as the data port. To use the serial port as the console port, slide Data/Console switch to

the Console side.

- Remote console:

Remote users can make a telnet connection to the remote console port (port 23) of the LS100W

via TCP/IP network.

Both methods require the user to log into the LS100W in order to continue.

2.3.1 Using Serial Console

1) Connect the one end of the serial console cable to the serial port of the LS100W.

Serial Device

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 49 50

No comments

Sena LS100W User Manual Page 13