Sena SMH5D-FM-UNIV User's Guide download pdf (Page 13)

English

SMH5-FM

5. Enter 0000 for the PIN. Some mobile phones may not ask for the

PIN.

6. The mobile phone conrms that pairing has completed and the

SMH5-FM is ready to use. You will hear a voice prompt saying

“Your headset is paired”.

6.2 Bluetooth Stereo Device Pairing

1. If the Bluetooth stereo device is integrated with the mobile phone

such as smartphones, you don’t need to pair the SMH5-FM with it

separately. When the SMH5-FM is paired with the mobile phone, it

is also paired as a stereo music device.

2. If you have a stand alone Bluetooth stereo device, follow the

pairing procedure separately. The procedure is the same as the

procedure of “6.1 Mobile phone pairing”.

Note:

1. If Bluetooth connection between the headset and a mobile phone is

disconnected, tap the Phone Button to recover the Bluetooth connection

immediately.

2. If Bluetooth connection between the headset and a media player is

disconnected, press the Jog Dial for 1 second to recover the Bluetooth

connection and play.

6.3 Bluetooth GPS Navigation Pairing

You can listen to voice instruction from Bluetooth GPS navigation.

Some GPS systems use mobile phone prole (HFP, Hands-Free

Prole) and others use stereo music prole (A2DP, Advanced

Audio Distribution Prole). Most motorcycle specic GPS systems

use mobile phone prole for turn-by-turn voice instruction. You can

simultaneously use a mobile phone and a GPS which uses mobile

phone prole by one of the following procedures.

6.3.1 Multipoint GPS Pairing

If you use GPS only for turn-by-turn voice instructions, not for Bluetooth

stereo music streaming, multipoint pairing is recommended for the

GPS connection. Multipoint Bluetooth pairing allows the SMH5-FM

to connect two HFP devices at the same time: mobile phone and

GPS navigation. Follow the steps below to pair the GPS using the

multipoint pairing.

1. Turn on the headset and press the Jog Dial for 5 seconds until the

red LED is rapidly ashing and you hear multiple beeps.

2. Within 2 seconds, tap the Phone Button again, then the LED turns

to blue ashing and the beeps turn to high tone double beeps.

You will hear a voice prompt saying “Multipoint pairing”.

3. Search for Bluetooth devices on the GPS navigation screen. Select

the Sena SMH5-FM in the list of the devices detected on the GPS.

4. Enter 0000 for the PIN.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 40 41

Comments to this Manuals

No comments

Sena SMH5D-FM-UNIV User's Guide Page 13

Comments to this Manuals

Related products and manuals for Motorcycle intercoms Sena SMH5D-FM-UNIV